I like to shoot my AR15 but with today's ammo prices and availability (even primers are impossible to find for those who reload) I have resorted shooting 22 LR through an AR15 using an adapter which allows me to do so......
So here is the problem. This particular weapon I have been using exclusively for 22 LR and cleaning it regularly however the one area in the AR15 which is hardest to access and clean is the gas port. In the military we would run long pipe cleaners down the gas tube and get it clean but there was no way to get the pipe cleaner through the gas port.
 |
| AR15 Bolt top, 22 LR adapter bolt bottom. |
The 22 bolt-adapter does not utilize the gas system to operate the bolt therefore it is not regularly 'blown out' via normal operation. Recently I was changing the barrel on this particular weapon and found upon removing the gas block from the barrel that the hole in the gas block and barrel was completely blocked from carbon and lead, and well blocked, so much so I had to use solvents and drill bits to clean it out. The carbon was almost as hard as steel, I realized if I had tried to revert back to 223 in this gun it would not have functioned at all and I would not have been able to 'field fix' it either, this weapon had about 1500 to 2000 LR rounds through it.
So here comes the advice, I will say I have not put this to the test yet however I just discovered the problem in the last few days and I think it will work. If you shoot using one of these adapters after each range session remove the bolt and with a can of solvent (carburetor cleaner works good) and with the aid of those little plastic tubes the solvent comes with shoot a quick burst through the gas tube and watch to see if it blows out in the barrel. After the solvent dries install the AR15 bolt and fire one or two rounds of 5.56 ammo to ensure it is operating and 'blow out' any remaining crud in the tube and port. This would ensure the gas system was functional and let you know if it needed more cleaning.
This is my solution, maybe someone else has other ideas.